Hi Thanks for using FixYa. On the Deflection board there are 3 capacitors CP 114, 120 and 150. If any of them is puffed up on top replace all the 3 capacitors CP150 2200UF 16 other 2 are 220UF 35v they will be green with gold writing on them. Resolder all pins on Fly Back Transformer (FBT) also. FBT could be in the power supply. Check the SMPS and in any event replace CP 120: 330UF/35V/HF & CP 150: 2200UF/16V/HF (May be bulged or vented) Always Resolder Cl031 & Cl032 (usually looks ok on visual inspection but common to ring crack). There is also a tech bulletin on this unit TV-06003 dated 12/8/2006 which states: Replace deformed ribboncableplastic connector BP005 on the flyback board. Thisconnector is warping or bowing (May not even look like it) and causing poor connections to the Ribbon Cable. Replace RCA P/N # 258686. Try putting pressure on the BP005 Connector and turn the set on. You may find the set will now work fine. Replace connector and you may wish to replace the ribbon as well while you are doing the repair!
Please do accept the solution if the issue is resolved or else revert for further assistance. Thanks Rylee
Thank You for accepting the solution, yes you are right replacing it should fix the issue. Sorry for replying late, somehow I missed your email.Thank You for accepting the solution, yes you are right replacing it should fix the issue. Sorry for replying late, somehow I missed your email.
Answers & Comments
Hi
Thanks for using FixYa. On the Deflection board there are 3 capacitors CP 114, 120 and 150. If any of them is puffed up on top replace all the 3 capacitors CP150 2200UF 16 other 2 are 220UF 35v they will be green with gold writing on them. Resolder all pins on Fly Back Transformer (FBT) also. FBT could be in the power supply. Check the SMPS and in any event replace CP 120: 330UF/35V/HF & CP 150: 2200UF/16V/HF (May be bulged or vented)
Always Resolder Cl031 & Cl032 (usually looks ok on visual inspection but common to ring crack).
There is also a tech bulletin on this unit TV-06003 dated 12/8/2006 which states: Replace deformed ribbon cable plastic connector BP005 on the flyback board. This connector is warping or bowing (May not even look like it) and causing poor connections to the Ribbon Cable. Replace RCA P/N # 258686.
Try putting pressure on the BP005 Connector and turn the set on. You may find the set will now work fine. Replace connector and you may wish to replace the ribbon as well while you are doing the repair!
Please do accept the solution if the issue is resolved or else revert for further assistance.
Thanks
Rylee
Thank You for accepting the solution, yes you are right replacing it should fix the issue. Sorry for replying late, somehow I missed your email.