I have 3 of the 954 model. If im using the phone
I have 3 of the 954 model. If i'm using the phone in my office and i'm using L1 the 2 other phone don't recognize that im using L1. If one of the phone pick up its automatic that its gonna go to L1 which is the line that i'm using instead going to L2. I did assign intercom number on each phone. how do I fix this problem?
Lands Phones - AT&T - 954 Corded Phone
Answers & Comments
Do you have DSL on the first line? I would say that you have split the line to the phones so that they are not able to recognize the off hook from your office phone because each phone has a DSL filter. So take your phone line from the back of the DSL modem (line 1) and split it to all of the phones. Put the filter in the line, if you need one before the splitter.
I had this same problem. I am using all 12 stations on the intercom. The intercom used line 1. DSL to the house uses Line 1. I used an upstream filter outside the house to all line 1 because individual filters filter out the intercom. Unfortunately the FAX is on line 2 (these are widely published phone numbers that could not be swapped). So I swapped the lines to the house so the FIRST phone line is the SECOND button on the phones. The outside filter does not interfere with the internal use of the intercom because it is no longer on the first button of the phones. Simple, bit confusing...