You have to open front door and remove tone and check it is there any paper inside other wise, open back door and check fuser assy have any papers, most probably any paper pies in side the paper path it will show same error.
A jam has occurred in the registration assembly area. 1. Press the 'down arrow' to see step-by-step information. 2. Open the top cover and remove the print cartridge. 3. Remove all media inside. 4. Lift the metal flap and remove any remaining media. 5. Verify that the media size matches the tray settings and the dial on the tray. 6. Reinstall the print cartridge and close the top cover. 7. To exit, press ? .
Answers & Comments
You have to open front door and remove tone and check it is there any paper inside other wise, open back door and check fuser assy have any papers, most probably any paper pies in side the paper path it will show same error.
A jam has occurred in the registration
assembly area.
1. Press the 'down arrow' to see step-by-step
information.
2. Open the top cover and remove the print
cartridge.
3. Remove all media inside.
4. Lift the metal flap and remove any
remaining media.
5. Verify that the media size matches the
tray settings and the dial on the tray.
6. Reinstall the print cartridge and close
the top cover.
7. To exit, press ? .