It'll be a tight fit and you'll probably have to make some changes to the motor mounts, don't know if the tranny will bolt up. The electrical could go either way. I always found it to be a fun challenge making these engines fit in such small vehicles.
Answers & Comments
It'll be a tight fit and you'll probably have to make some changes to the motor mounts, don't know if the tranny will bolt up. The electrical could go either way. I always found it to be a fun challenge making these engines fit in such small vehicles.
Mechanically it can be done, but I'm not sure about the computer, wiring harness, and plumbing that would have to go with it.