Bad switch, or blown fuse, turn on tail lights and check for voltage at connection if no voltage and fuse is OK have switch checked and replace
Tail lights work off the main light switch or through the light control module the first click is tail and park lights , the second click is main beams or low beams
Copyright © 2024 QA.XPDF.PUB - All rights reserved.
Answers & Comments
Bad switch, or blown fuse, turn on tail lights and check for voltage at connection if no voltage and fuse is OK have switch checked and replace
Tail lights work off the main light switch or through the light control module
the first click is tail and park lights , the second click is main beams or low beams