I have a 3406 E model . I recently changed the injector cups and seals and one injector, because it was getting fuel in the radiator. One month later it started doing it again. So we found a couple of bad seals **** up from when we installed them.. Now we are getting water in the fuel tanks. I thought it was from a station...Because it wasn't showing hot.. Now I have noticed the radiator is about 3 gallons low. Can you tell me what the problem could be????
Hello! More than likely you have a cracked head on the engine...The crack is most likely to be found in the valve guide allowing fuel and coolant to mix... Guru...saailerHello! More than likely you have a cracked head on the engine...The crack is most likely to be found in the valve guide allowing fuel and coolant to mix... Guru...saailer
Answers & Comments
Hello! Yes, I'll diagnose the fault, however can you identify the vehicle; Year, make (Mercedes?) and engine....guru...Saailer
I’m happy to help further over the phone at https://www.6ya.com/expert/david_6df67de3b14de867
Hello! More than likely you have a cracked head on the engine...The crack is most likely to be found in the valve guide allowing fuel and coolant to mix...
Guru...saailer