I have a 92 eagle talon 2.0 dohc non tubo i bought the car and drove it home only thing they said wrong with it is it needed a starter well come to find out the flywheel was to small the starter wasnt hitting the teeth on flywheel so i found a bigger flywheel car starts now without push starting it but now when i start the car and go to put it in gear it wont let me but when i shut off the car i can go through the gears i bled and bled the clutch system tried adjusting clutch pedal replaced the slave cylinder replaced throwout bearing dont know what else
This sounds like what would happen if you put the clutch disk in backwards. If this was a pressure issue like you already went thru then you would feel a pressure problem with the pedal. Try looking up thru the inspection hole to see what action is taking place while someone pushes the pedal. This should give you an indication on wehather or not you need to take it apart again.
Answers & Comments
This sounds like what would happen if you put the clutch disk in backwards. If this was a pressure issue like you already went thru then you would feel a pressure problem with the pedal. Try looking up thru the inspection hole to see what action is taking place while someone pushes the pedal. This should give you an indication on wehather or not you need to take it apart again.