I have a BEKO GNE134620X fridge with a multifunction compartment, that only works correctly in fridge mode. When switched to freezer mode it will not cool below -6C. Does the main pcb need replacing?
Replaced multifunction air sensor which made no difference. The main fridge and freezer compartments operate correctly.
Is anything blocking the sensor,if it does not cool below -6 and where are you checking temp it could be a refrigerant problem.Turn fridge off for 10 min and start again.
Answers & Comments
Is anything blocking the sensor,if it does not cool below -6 and where are you checking temp it could be a refrigerant problem.Turn fridge off for 10 min and start again.