I have a Bissell proheat steam cleaner, the 9500 series, and it stopped spraying water. I cleaned out the "gunk" in the heater part, put it back together, and it worked for about 3 min. Then it stopped spraying water and solution again. The flow gauge doesn't even turn. I'm lost at what to do!! I've only had this for about a year!
Vacuums - Bissell - 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends...
Answers & Comments
There is probably more gunk in there, the gunk can dry and break off in little shards which can get clogged up.
You can try putting straight vinegar in it, try running it through and let it sit in there for a while to see if it can help loosen up and flush out the gunk.