I have a coleman powermate pressure washer 2400 psi,the siphon injector shoots water out of the top when i am not using it to wash my car or clean my gutters or over hang on my house
Washing Machines
Copyright © 2024 QA.XPDF.PUB - All rights reserved.
Answers & Comments
The hoses connects to a block which houses a valve. IT HAS DIRT OR DEBRIE IN IT. iT WILL NEED TO COME APART AND CLEANED. aFTER CLEANING IT SMEAR vASELINE OVER IT ALL SO IT WILL SEAL. REINSTALL AND TRY IT OUT. THE VALVE WILL HAVE ANOTHER VALVE BELOW THE FIRST ONE YOU REMOVE SO REMOVE THE LOWER ONE AS WELL UPON CLEANING
this is not a clothes washing machine. this is a pressure washer that pressure wash sidewalks, brick houses, gutters & overhang on houses, driveways, cars,etc. its similar like a gas generator. ypu can pull it up at www.powermate.com. the siphon injector sits on top of the gas motor. it mixes chemical solution with water which cleans the item, then you rinses it off with clear water. you can take the injector off. it has a spring and a ball bearing inside of it. it needs fixing, it should not have water coming out of it.
this is not a clothes washing machine. this is a pressure washer that pressure wash sidewalks, brick houses, gutters & overhang on houses, driveways, cars,etc. its similar to a gas generator. you can pull it up at www.powermate.com. the siphon injector sits on top of the gas motor. it mixes chemical solytion with water which cleans the item, then you rinses it off with clear water. you can take the injector off. it has a spring and a ball bearing inside it. it needs fixing, it should not have wayer coming out of it.