I have a convergence problem with my Mitsubishi WT-46809 which was described in a different post here. The expert said it could be easily self fixed. He was e mailing instructions, but I couldn't seem to get in touch with him. Could you help me fix my convergence problem. Picture seems arched with red and green separation. It doesn't always do it, but more and more often
THE center board has some pico fuses, note the two circled; they are F9ao4 and 9ao5 and are five amp; one or both are bad. check like any fuse. THE center board has some pico fuses, note the two circled; they are F9ao4 and 9ao5 and are five amp; one or both are bad. check like any fuse.
Answers & Comments
I am the one with the instructions: your model uses two of the STK-392-570 CHIPS.
Everything involved is on the middle circuit board.
Some skills are involved as the chips etc are soldered in.
I get a lot of requests from old solutions and cannot follow up on all them.
Provide a email or email [email protected] for me to have them sent via her.
Attached photos show chips and other parts.
SD TECH
LOOKS LIKE THIS BUT WILL HAVE 570 NUMBER ON IT.
do you have yahoo IM?
THE center board has some pico fuses, note the two circled; they are F9ao4 and 9ao5 and are five amp; one or both are bad. check like any fuse.