I have a craftsman table saw.;;;;;;;;Not a power matic. I would like to know how the fence works and how the stops and adjustments work. There is a stop on the right side of the fence that I do not have and I need to order it from sears.I need to know how it effects the accesory of the saw. The Model of the saw is 351 221140.I think it a micro adjustment knob.If I could see a parts break down I may be able to order the parts. Thank you H D Perry. PS I have a great tabel saw for big things
Saws - Powermatic - 1660802K Model 66 Special Edition 10 Inch Left Tilt 3...
Answers & Comments
I think you can download a manual for your saw from this link. or this link.
Another site I have had good luck with for these older models is here. Choose the publications/reprints tab at left, then choose craftsman in the manufacturer's link, and then click on machine type to sort the list into table saws. From there you might find a similar vintage manual that has the details you need. Many models have similar parts, and the descriptions of fence operation, etc are somewhat common.
Good luck.
I hope this information allows you to resolve this issue. If you need further assistance, please post back with a comment to this thread.
If I've managed to answer your question or solve a problem, please take just a moment to rate this post....thanks!