I have a ddx6017 i changed the battery and forgot completly about my radio..now i dony remeber my code and cant use the radio..and to top it all of i called kenwood and they want 90 plus dollars just to unlock it for me, what can i do besides that???
Car Audio & Video - Kenwood - DDX6017 Car DVD Player
Answers & Comments
Hi,
Press and hold the Auto button.
- While holding the Auto button, push and hold the Track Up button. The “_ _ _ _” will disappear after about 5 sec.
- Enter KCAR using the <"Arial, sans-serif">remote control from a higher end CD Receiver or any Excelon CD Receiver.
Enter "KCAR” with the remote controller as described below.“K”: Press TRACK UP key (>>|) after pressing 5 key twice.
“C”: Press TRACK UP key (>>|) after pressing 2 key once.
“A”: Press TRACK UP key (>>|) after pressing 2 key three times.
“R”: Press TRACK UP key (>>|) after pressing 7 key twice.
* If you commit a mistake in the code entry, the unit enters the
code request mode again.
- Press the Track Advance button on the remote to enter the override code.
- The unit will enter the All Off or Standby mode if done properly.
Video Unlock:- Use a remote from a higher end CD Receiver or any Excelon CD Receiver. Some Video remotes will work, switch on remote must be set to AUD.
- Press 55222277 on the remote. There will be NO visual verification when entering the override code.
Head units with a Up / Down Volume control buttons:- Press and hold the Volume Up button.
- While holding the Volume Up button, push and hold the Disp button. The “_ _ _ _” will disappear after about 5 sec.
- Enter KCAR using the <"Arial, sans-serif">remote control from a higher end CD Receiver or any Excelon CD Receiver.
Enter "KCAR” with the remote controller as described below.“K”: Press TRACK UP key (>>|) after pressing 5 key twice.
“C”: Press TRACK UP key (>>|) after pressing 2 key once.
“A”: Press TRACK UP key (>>|) after pressing 2 key three times.
“R”: Press TRACK UP key (>>|) after pressing 7 key twice.
* If you commit a mistake in the code entry, the unit enters the
code request mode again.
- Press the Track Advance button on the remote to enter the override code.
- The unit will enter the All Off or Standby mode if done properly.
Let us know if you want something more else accept the suggestion.Thank You for contacting Fixya.com