I have a fantasy dreammaker spa that plugs into a regular 120v outlet. At times the spa will run properly for weeks. Then it will constantly trip the switch on the spas plug. When I reset and test it works fine and starts back up. Sometimes it will run for a weak. Currently it is running for 1 to 3 minutes then shuts off. Any advice or suggestions would be appreciated
Pool & Spa - Dream Maker Spas - Dream Maker Ez Spa Hot Tub
This is a GFCI and will trip at the least bit of water at the plug or at the wiring inside the spa controls. Just go through the system and make sure all is dry. Use a hair dryer in the outlet and on the controls and wiring. If you still have problems you may need to call an electrician.
Answers & Comments
This is a GFCI and will trip at the least bit of water at the plug or at the wiring inside the spa controls. Just go through the system and make sure all is dry. Use a hair dryer in the outlet and on the controls and wiring. If you still have problems you may need to call an electrician.