I have a Janome Newhome 672. Cleaned and oiled it, works great. But, the decorative stitches will not form correctly. The reverse is not engaging. How can I fix this. Also, the button hole knob h
Could also be a problem with the gear or cams that make the decorative stitch. if the reverse works making a straight stitch and zig zag, then there is nothing wrong with the reverse.
In most cases Laurie, with decorative stitches selected some machines can't sew in reverse. Your stitch length is too long or too short to make the decorative stitches sew correctly. So many things could be wrong. I'd need more info to get you going again.
Answers & Comments
Could also be a problem with the gear or cams that make the decorative stitch. if the reverse works making a straight stitch and zig zag, then there is nothing wrong with the reverse.
In most cases Laurie, with decorative stitches selected some machines can't sew in reverse. Your stitch length is too long or too short to make the decorative stitches sew correctly. So many things could be wrong. I'd need more info to get you going again.
Cheers,
Kelly
San Diego, CA
Embroidery Services