I have a nautilus tc916, as soon as i turn on poer the vsd board frys at p23 on the board, was wondering if anyone actually has illustrations of how the board looks wired for 110 volts, and also if anyone knows what causing this problem?. machine comes on and everything but won't do nothing, display stays blank
If that voltage is 120Vca is o.k p6-p7-120Vca. P8-p6 =220Vac
you must have tolerance + or - 10% , However I will recomend some stabilizer Voltage Radio Schack or another Center for to supply electronic parts computer.If that voltage is 120Vca is o.k p6-p7-120Vca. P8-p6 =220Vac you must have tolerance + or - 10% , However I will recomend some stabilizer Voltage Radio Schack or another Center for to supply electronic parts computer.
Answers & Comments
Dear Sir:
The VSD, is installed in a bracket located side of the treadmill.
P6-P7= 115VCA
P8-V6=230 VAC
Be carefully you must do this with testing Dvom o Vom. That is you do not any schematic for to do this.
sincerely.
E.CUADRA
mistake above should be p23 on the vsd board.not [email protected]#
If that voltage is 120Vca is o.k p6-p7-120Vca. P8-p6 =220Vac
you must have tolerance + or - 10% , However I will recomend some stabilizer Voltage Radio Schack or another Center for to supply electronic parts computer.