I have a new Bowflex Revolution Spiraflex homegym. Looking at the unit the left cable is off tract inside the mainframe and hanging out of the side where the tension lever is. How should I fix this? Thanks so much for your help
Sport & Outdoor - Others - Bowflex - Revolution Home Gym
Answers & Comments
I can help you with your Bowflex Revolution home-gym problem with a loose cable.
- Take the sides and top off the main unit (you will need a very long, think Phillips screwdriver to get on e of the screws out.)
- Remove the 5lb plates for the spiraflex weights.
- Pull out the tension knob.
- Move the inner wheel clockwise, making sure the bands are straight down, not angled, & that the 'counter weights' are resting on the springs inside.
- Then replace the plates and sides.
Follow these steps to untangle / remove the slack of your Bowflex Revolution cable:
I hope that helps.
___________________________________________
Download Bowflex Revolution Assembly Manual
Download Bowflex Revolution User Manual