Oil to gas. To obtain the correct oilmix ratio, pour 3.2 ounces of 2--cycle synthetic oil into one gallon of fresh gas. Plug gap 0.025 inch (0.6 mm) Or you can get the manual on the link below. http://www.mowersdirect.com/manuals/BVM200VS_Man.pdf Good Luck and please rate 4 thumbs up for free answer
Or it is 40 to 1 on the oil mix Or it is 40 to 1 on the oil mix
Copyright © 2024 QA.XPDF.PUB - All rights reserved.
Answers & Comments
Oil to gas.
To obtain the correct oilmix
ratio, pour 3.2 ounces of
2--cycle synthetic oil into
one gallon of fresh gas.
Plug gap
0.025 inch (0.6 mm)
Or you can get the manual on the link below.
http://www.mowersdirect.com/manuals/BVM200VS_Man.pdf
Good Luck and please rate 4 thumbs up for free answer
Or it is 40 to 1 on the oil mix