1. Update the phone's software. Do this as follows:
From Idle mode, touch --> Settings --> Software Update.
Follow the on screen instructions.
2. Reset your phone to its default settings. To reset your phone: 1. From Idle mode, touch --> Settings --> Reset Settings. 2. Place a check-mark next to those settings you wish reset:
All:selects all fields and places a check-mark alongside all entries.
Sound Profiles
Display and Light
Phone
Alarms
3. Touch Reset. 4. Enter your phone password, if prompted and touch Confirm.
If your issue is not resolved after trying the above steps, it is possible that the orientation sensor has malfunctioned.
Slightly tap the phone while orienting it sideways. You might also need to contact the dealer for warranty repairs (if applicable).
If you want to contact Samsung for repairs, click here for contact information
If you have this feature in the phone then you have to go to Menu->Tools->Phone->Display. Here you will find the option to change the layout of the display.
Answers & Comments
Hi,
- From Idle mode, touch --> Settings --> Software Update.
- Follow the on screen instructions.
2. Reset your phone to its default settings. To reset your phone:
- All:selects all fields and places a check-mark alongside all entries.
- Sound Profiles
- Display and Light
- Phone
- Alarms
3. Touch Reset.
Try the following to resolve the issue:
1. Update the phone's software. Do this as follows:
1. From Idle mode, touch --> Settings --> Reset Settings.
2. Place a check-mark next to those settings you wish reset:
4. Enter your phone password, if prompted and touch Confirm.
If your issue is not resolved after trying the above steps, it is possible that the orientation sensor has malfunctioned.
Slightly tap the phone while orienting it sideways. You might also need to contact the dealer for warranty repairs (if applicable).
If you want to contact Samsung for repairs, click here for contact information
If you have this feature in the phone then you have to go to Menu->Tools->Phone->Display. Here you will find the option to change the layout of the display.