I have a seiki SE65GY25 and the screen is not coming on
The screen normaly lights up bright blue, then the seiki logo when it turns on. now it has a very faint blue color but does not light up all the way. no on screen menus work but the sound does work. i tried all the hdmi ports and the same results. this happened a couple weeks ago but went away for a week and it worked fine, then came back again.
Televison & Video - Seiki - SE65GY25-M 65.0-Inch 1080p 120Hz LED HDTV Black
Answers & Comments
Fault at its main digital board. Short circuited component/s at it. Contact any service technician; or the authorized service center. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts.
http://electronicshelponline.blogspot.com/
In most cases, the main board might have to be replaced. If so, a software [firmware] update too might be necessary.
Before going further; try a hard reset first. If it does not help you, replace the main digital board. There are two methods to reset TVs. The first is simple to do; a Hard Reset. The other is somewhat skilled; is a Factory Reset (System Reset). To make it a hard reset, just unplug the TV from AC mains wall socket, and re-plug it back after 15 minutes or so. If you do this by overnight is better. This procedure will make it a hard reset. If you want to make it a system reset [Factory Reset]; you have to enter its service mode option, and select the factory reset option. If you wish to get some details; visit the site linked here.