I have a US Robotics usr5461 wireless router. It
I have a US Robotics usr5461 wireless router. It works fine except when I access the router setup etc., the status page shows incorrect client types. The computer I have wired to the router sometimes shows as wireless. My TIVO dvr connection is wireless but often is stated as wired. The same thing with our laptops which are wireless. Not a big deal but I should be saying the right thing.
Computers & Internet - U.S. Robotics - USRobotics USR5461 Wireless MAXg Router wireless router...
Answers & Comments
You might want to check your firmware version to make sure you have the lastest.
BETA Firmware Version 3.93.35.0.9This firmware fixes the following issues:
- Printing issues with CUPS version 1.2.
USR5461a-v4.3.93.35.09.usr 1.8 MB 06-05-08Firmware Version 3.93.35.0.8This firmware fixes the following issues:
- DST (Daylight Saving time) Firewall issue with how IAC (Internet Access Control) works.
- PPPoE server disconnect/reconnect
- PPPoE inactivity timer
- PPTP client disconnect/reconnect
- backup/restore settings
Note: If upgrading from Version 3.91.37.0.3, follow these instructions before proceeding.- With a thin tool, such as a paper clip, briefly press the RESET button on the back of the router.
- Wait about 30 seconds.
- Continue with instructions below.
Important: To ensure a successful upgrade, please perform the firmware upgrade from a client that is physically wired to the router. A wireless client may become disassociated from the router during the upgrade process resulting in an incomplete upgrade.- Download this file to a temporary location on your computer's hard disk drive.
- To upgrade your USRobotics Wireless MAXg Router with all operating systems, open an Internet browser and enter the router's IP address. The default IP address of the router is 192.168.2.1
- Enter your User name and Password. Click OK.
- Click Device in the main menu.
- Under the "Upgrade Router" section, enter the location of the USR5461-v3.93.35.0.8.usr file in the text box, or click the Browse button to search for the file. Then click the Upgrade button to begin the upgrade process.
- When the upgrade process is complete, the router will reboot. To re-establish a connection with your router, wait approximately 15 seconds and click Continue.
USR5461-v3.93.35.0.8.usr 1.8 MB 10-25-06