I have a wc from VB "The City Collection" Product number 7625. which is very out of date. I need to replace it, but the waste is verticle and INTEGRAL (inside the base of the wc), therefore the waste pipe in the floor is situated too far away from the wall to be able to replace with normal verticle outlet wc. Any ideas much appreciated
Well the rough-in of the wc is the measurement from the wall to the center of the drain opening take that measurement and go to your local plumbing warehouse and ask them to look up any and all wc with that rough-in and pick one you like. If there are non you like or there is non with that rough-in then I see no other way then to move the drain to fit the one you like. There are some offset closet collars out there but if you are working a cement for it would be just as easy to move the drain.
Answers & Comments
Well the rough-in of the wc is the measurement from the wall to the center of the drain opening take that measurement and go to your local plumbing warehouse and ask them to look up any and all wc with that rough-in and pick one you like. If there are non you like or there is non with that rough-in then I see no other way then to move the drain to fit the one you like.
There are some offset closet collars out there but if you are working a cement for it would be just as easy to move the drain.