The arm is not closing a switch or a switch is stuck closed in the mech area. You will probably need to clean all moving parts with alcohol because chances are, the old oil or grease has become sticky and things are not moving correctly, especially if you notice the arm moving slower than it should. Check all switches and use a little alcohol on them too.
Answers & Comments
The arm is not closing a switch or a switch is stuck closed in the mech area. You will probably need to clean all moving parts with alcohol because chances are, the old oil or grease has become sticky and things are not moving correctly, especially if you notice the arm moving slower than it should. Check all switches and use a little alcohol on them too.