I have a Zanussi 1600 Jet System Washing Machine, it has started the cycle and 4 mins into it, an E10 error reads on the display, have turned the machine off, and back on, checked pipes, can see you physical sign of blockage, could you please help ... Much appreciated if you could
Washing Machines - Zanussi - IZ161S Front Load Washer
Hello, This error code relates to water pressure check that the pipes are not kinked,check the water valves are fully on also check if the little filters in the end of the hoses are cleaned.Make sure that the mains water pressure has not been reduced.There could still be a fault with one of the inlet valves but it is most probably the little gauze filters
Answers & Comments
Hello,
This error code relates to water pressure check that the pipes are not kinked,check the water valves are fully on also check if the little filters in the end of the hoses are cleaned.Make sure that the mains water pressure has not been reduced.There could still be a fault with one of the inlet valves but it is most probably the little gauze filters
I have a Zanussi Jet System 1600 (5 years old), for the last two weeks it wont empty the fabric conditioner and also shows up error code E20