I have an averatec D1002UHCE-1 and for no reason the screen is not turning on. LEDs and Fans turn on but the screen does not show anything. What can i do?
Computers & Internet - Averatec - D1002UHCE-1 All-In-One Intel Desktop PC - Intel Core 2 Duo...
Answers & Comments
Clarification - I have the same problem. Keep in mind that this is an All-in-one. There is no cable from PC to monitor. PC is built into the monitor. I suspect that the motherboard needs to be replaced, since even if it is the graphics adapter, it's on the motherboard...
I had the exact same problem, fixed by heatgun the video card. Check out these 2 links. They are very helpful!
http://www.techpowerup.com/forums/archive/index.php/t-148602.html
http://forums.nvidia.com/index.php?showtopic=196967
Check that you have the cable from the monitor to PC is going into the right port, sometime there are two ports, one for onboard video and another PCI or PCI express for video output. If there are two looking the same try it in the other, if that dont work, check the power supply is plugged in correctly and maybe the fuse in the plug in case it has blown. If it has replace fuse. If everything has been checked and all cables in the right locations and nothing coming on the screen, including any leds, power lights etc... then I suspect it's a faulty monitor. Also try the monitor in another PC if possible or try a different monitor in the PC if possible. Hope I helped you somewhat.
You apparently have no idea what an All in one is. There is no cords for the monitor to check. It comes with the Monitor inside and no external cords to check.