The answer to your question can be found at this URL:
http://0000lx5.previewcoxhosting.com/manuals_fans.htm
For some reason I could not bring up the Ansley unit, but I think you will find the only difference in general is the size and shape. As long as you fan has a fan, lamps, and a remote control, the wiring should be the same.
In general a fan with lamps will have three wires coming out the top when used with a remote control: White - Circuit neutral Green or bare wire - Equipment ground, the third plug we have to deal with on many tools, etc, an inconvenience but an important safety device of sorts. Black or Red, etc - Power into the fan.
If the fan and lamps are to controlled independently of each other, there may be more wires coming out for connection to wall switches.
Important note - If you are installing a fan in this ceiling box for the first time, there are requirements for special fan rated ceiling boxes in order to be able to hold the weight of the fan and many municipalities require permits for ceiling fan installations - boiler plate CYA.
If you find this solution helpful, I would appreciate a Thumbs Up from you. If you require additional clarification, please contact me.
Be well. Paul