By the motor there is a red wire that comes from the coil area. Make sure it is properly seated. Mine was not due to the connector melting. Had to do a little backyard/garage engineering but reconnected and it works.
No fuse, no power reset switch. I started with the wires to the motor, and found no voltage to the armature when pulling the trigger. Taking the handle apart, I had a wire that was not seated in the trigger switch. reinserted wire. Be careful on putting the wires back in place, not a lot of play.
Answers & Comments
I have a black & Decker Electric Edge Hog, does not turn on anymore. Is there a fuse or power reset switch?
By the motor there is a red wire that comes from the coil area. Make sure it is properly seated. Mine was not due to the connector melting. Had to do a little backyard/garage engineering but reconnected and it works.
No fuse, no power reset switch. I started with the wires to the motor, and found no voltage to the armature when pulling the trigger. Taking the handle apart, I had a wire that was not seated in the trigger switch. reinserted wire. Be careful on putting the wires back in place, not a lot of play.