I have just purchase a Wagner W550 electrical spray gun. Not having used one before I need to know how do I know if the coating mayterial need to be diluted and if so by adding how much solvent. I intend using cellulious wich is metheleted spirit based. Can you help. Regards George Simpson
Have a look at the instruction manual. It should state the viscosity that the paint should have. Use a viscosity cup to measure the time the paint takes to drain from the viscosity cup. Dilute the paint if it takes too long.
Answers & Comments
Have a look at the instruction manual. It should state the viscosity that the paint should have. Use a viscosity cup to measure the time the paint takes to drain from the viscosity cup. Dilute the paint if it takes too long.