I have problem with my xtenda x300 and on my display stay error mesage: internal error 0x2025 0x08x-0. I aprechiate if you could send me a solution. Thank you
Computers & Internet - NComputing - X300 3 User Expansion Kit Graphic Card
My recommendation is to uninstall the vSpace software, reboot, run thier cleanup utility, and reinstall the latest version. Before reinstalling, make SURE that you have applied XP SP3 and ALL of the current MS updates. Additionally, browse Device Manager and make sure there are NO missing or conflicting drivers. Lastly, if Intel Active Management Technology is installed, disable it. This will be listed in the ports section of Device Manager as either IAMT or SOL/COM3. Do NOT, I repeat, do NOT install from the provided CD. As of this posting date, the cleanup utility is available here: nc-eng.com/tools/ncuninstall. The most up to date vSapce for X300 on XP is at: ncomputing.com/download/x300.zip. If you hit this post later and the supplied URLs are not valid call NComputing TS at 888-365-1210. Lastly do NOT forget to register the vSpace software and related XD1 boxes.
Solution: Please change your VGA Card wit Supported Display Card with external VGA, cause if you use for unsupported VGA card the problemsthatwilloccur. I suggest using external VGA (not use onboard VGA) like Nvdia Gforce. I always use that produk for all my Client.
For New Driver X300 Graphic you can download there.
Answers & Comments
My recommendation is to uninstall the vSpace software, reboot, run thier cleanup utility, and reinstall the latest version. Before reinstalling, make SURE that you have applied XP SP3 and ALL of the current MS updates. Additionally, browse Device Manager and make sure there are NO missing or conflicting drivers. Lastly, if Intel Active Management Technology is installed, disable it. This will be listed in the ports section of Device Manager as either IAMT or SOL/COM3. Do NOT, I repeat, do NOT install from the provided CD. As of this posting date, the cleanup utility is available here: nc-eng.com/tools/ncuninstall. The most up to date vSapce for X300 on XP is at: ncomputing.com/download/x300.zip. If you hit this post later and the supplied URLs are not valid call NComputing TS at 888-365-1210. Lastly do NOT forget to register the vSpace software and related XD1 boxes.
Solution: Please change your VGA Card wit Supported Display Card with external VGA, cause if you use for unsupported VGA card the problems that will occur. I suggest using external VGA (not use onboard VGA) like Nvdia Gforce. I always use that produk for all my Client.
For New Driver X300 Graphic you can download there.
I hope it usefull
Regards,