I have the below listed Spa pump & heater . No matter how long or what temp I set the water remains cold. Acura Power Station Model#ST115ODP40G-17-AP-F 60 HZ 240 HP 6000 Watts 40 AMP
Thank you for posting your question here on Fixya.com. First, test to see if power is getting to the element lead posts. If so, your element is bad and will need to be replaced. If not you will need to determine if a limit switch is tripped or bad, if the pressure switch is closing, and if the inline fuse has blown. Any one or combination of those failures will cause the heater to remain off. If this answer does not fix your problem, please comment with additional details prior to rating the answer. Positive feedback is appreciated once your problem is solved! John
Answers & Comments
Thank you for posting your question here on Fixya.com.
First, test to see if power is getting to the element lead posts. If so, your element is bad and will need to be replaced. If not you will need to determine if a limit switch is tripped or bad, if the pressure switch is closing, and if the inline fuse has blown. Any one or combination of those failures will cause the heater to remain off.
If this answer does not fix your problem, please comment with additional details prior to rating the answer. Positive feedback is appreciated once your problem is solved!
John