Here's a link to a similar problem that I've solved for another Fixya user. This has diagrams, and will walk you through step by step on how to fix this issue.
If you still have any questions, please feel free to reply to this repair by adding a comment, and I'll be happy to provide any follow up answers that you need to get this fixed.
If this was helpful to you, please be so kind and rate the repair helfpul, or by leaving some feedback for me. This is greatly appreciated by the Fixya community. Thanks so much.
Answers & Comments
Hi There,
Here's a link to a similar problem that I've solved for another Fixya user. This has diagrams, and will walk you through step by step on how to fix this issue.
If you still have any questions, please feel free to reply to this repair by adding a comment, and I'll be happy to provide any follow up answers that you need to get this fixed.
http://www.fixya.com/support/t4675582-dc07_model_cannot_get_stand_fully
If this was helpful to you, please be so kind and rate the repair helfpul, or by leaving some feedback for me. This is greatly appreciated by the Fixya community. Thanks so much.
Chris Jones
GoVacuum.com