I have the finderscope for konustart-700 complete with stand but i dont seem to have any means of attaching-it mentions bolts in the manual which i dont have and i also cant see any bolt holes
Optics - Konus - Konustart 700 (120 x 60mm) Telescope
You probably need to use the same screws that hold on the focuser at the rear of the tube. If they did not send you slightly longer screws you can find replacements at a well stocked hard ware store. Just take one of the screws with you and buy a slightly longer screw.
Answers & Comments
You probably need to use the same screws that hold on the focuser at the rear of the tube. If they did not send you slightly longer screws you can find replacements at a well stocked hard ware store. Just take one of the screws with you and buy a slightly longer screw.