I have the upgraded 2140. I am doing satin stitching. I was having tension issues and finally got it working for me. I changed thread color and now the top thread is not connecting with the bobbin. It sews a few stitches then stops with the error message and a ball of thread on the under side of the fabric. I have tried different settings and switched to a straight stitch and still have the same problem. This machine is new to me so I am still learning how to use it. Any help will be appreciated
It sounds like the problem is actually with the needle thread, remove the spool from the machine, raise the preser foot to the up postiton and the rethread the machine. Good Luck! Doug
Answers & Comments
It sounds like the problem is actually with the needle thread, remove the spool from the machine, raise the preser foot to the up postiton and the rethread the machine.
Good Luck!
Doug