I Hooked up my new stereo and cant get any sound. I put the factory Bose back in and the sound works. Hooked up my new stereo to another car and it has sound. Can anyone tell me Why im not getting sound when i install it. Wiring harness is conneceted properly
If you had a "Bose" sound system - Factory installed - it should have and Amplified System - which means the original stereo will supply power to the Speaker Amps - that is the circuit that didn't get connected and why there is no sound. I hope that resolves your issue Thanks
most often the circuit is there with the aftermarket radio
"Antenna motor on" or "Amp On" is the output you need - both will apply 12 volt signal with radio ON.
Not sure about the one you need to connect to on the car - however after all the other necessary ones like for speakers - key on power - memory power - ground - there are not too many circuits left .
I seem to remember blue for Chrysler products.
Let me know if that helps
thanksmost often the circuit is there with the aftermarket radio "Antenna motor on" or "Amp On" is the output you need - both will apply 12 volt signal with radio ON. Not sure about the one you need to connect to on the car - however after all the other necessary ones like for speakers - key on power - memory power - ground - there are not too many circuits left . I seem to remember blue for Chrysler products. Let me know if that helps thanks
Answers & Comments
If you had a "Bose" sound system - Factory installed - it should have and Amplified System - which means the original stereo will supply power to the Speaker Amps - that is the circuit that didn't get connected and why there is no sound.
I hope that resolves your issue
Thanks
most often the circuit is there with the aftermarket radio
"Antenna motor on" or "Amp On" is the output you need - both will apply 12 volt signal with radio ON.
Not sure about the one you need to connect to on the car - however after all the other necessary ones like for speakers - key on power - memory power - ground - there are not too many circuits left .
I seem to remember blue for Chrysler products.
Let me know if that helps
thanks