I installed the tank on the bowl hand tight, but it seems loose
I installed the Jacuzzi tank on the bowl and hand tightened the wing nuts according to the directions. The tank still seems to move back and forth (not side to side) without much pressure, but it does not leak. How do I know if this is tight enough? Thanks
Home - Jacuzzi - Bath Era BK37 959 White toilet bowl and tank
Answers & Comments
Thats a tough call, i used to battle with this when i was out in the field fixing many toilets,...if it don't leak, it's tight enough,..concerning the rocking, i used to place little shims under tank to stop it rocking,....don't force nothing,.and make sure your hand tight is good-n-snugg. good luck, good question, cracklin joe