I just purchased a new blank case to start over with my system. The front USB connectors for the case are individual-pin and Only have 4 connectors per usb (which I'm not used to). My motherboard is a gigabyte ga-m68m-s2p, and I can't seem to find a pinout or the legend on the board itself. Any assistance would be appreciated
Computers & Internet - Gigabyte - GA-M68MT-D3 & Athlon II X4 630 Bundle (GAM68MTD3WAIIX4630)...
Looking at your MB with the processor on top. In the lower right hand corner are two connectors, F_USB1 and F_USB2. This should be what you are looking for.
ONE SIDE http://pinouts.ru/Slots/USB_pinout.shtml Use any mother board manual.
Hope this helps.
If you are helped you can rate on the 4 thumbs and leave a short comment,because, this is the free side and I can get the chance, to help people like you . Thanks for using fixya .
Answers & Comments
Looking at your MB with the processor on top. In the lower right hand corner are two connectors, F_USB1 and F_USB2. This should be what you are looking for.
Hope this helps.
Hello,
Cot with a cutter and install individual,
ONE SIDE
http://pinouts.ru/Slots/USB_pinout.shtml
Use any mother board manual.
Hope this helps.
If you are helped you can rate on the 4 thumbs and leave a short comment,because,
this is the free side and I can get the chance, to help people like you .
Thanks for using fixya .