I just replaced cylinder head and now my car wont start up
I have a 1994 acura integra it has a gsr motor in it and i had to get a new head and put a 1995 ls head on my gsr block and now my car wont kick over i connected everything what could be wrong with my engine
Cars & Trucks - Acura - Integra - 1994 Acura Integra
Answers & Comments
Is timing correct?
First make sure you are getting spark.
Some questions you need to know are what year head is the LS. Did you use the LS Intake manifold and throttle body. Problem is if you didnt use a OBD1 LS and it is OBD2 or OBD0 The Throttle position sensor wont allow the engine to start. Same with the Distributor, because your crank angle position sensor is in your distributor and a OBD1 ECU can communicate withe OBD0 or OBD2
If it is all OBD1 Then I would do a compression and Cyl. Leak down test.