I just switched chassis and now there's no signal coming to the screen. I tried changing the secondary PCI express port with the same result. My setup is: Motherboard: FATAL1TY FP-IN9 SLI Graphics card: G-Force 8800 Ultra CPU: Can't remember. I didn't remove the CPU and it's MASSIVE passive-cooling unit during the move - could that have damaged the motherboard? I was extremely carefull with handling and moving it
Computers & Internet - Abit - Fatal1ty FP-IN9 SLI Motherboard
Well the massive heatsink could have damaged the mother board bit i dont think that is the case as you yourself have handled it carefully. Try removing the ram modules and reinsert them after cleaning. Clean the ram slots too. removing any remains of dust with a air blower from the system may also help. if all of this doesnot work try using another graphics card if you can. Moreover double check all the wiring again.
Answers & Comments
Well the massive heatsink could have damaged the mother board bit i dont think that is the case as you yourself have handled it carefully. Try removing the ram modules and reinsert them after cleaning. Clean the ram slots too. removing any remains of dust with a air blower from the system may also help. if all of this doesnot work try using another graphics card if you can. Moreover double check all the wiring again.
happy to know that helped, Thanx. :)