I need a diagram of the brake lines and ABS module for my 2001 GMC Yukon. I cut out the rusted line and replaced it with a new line only to find out it was the wrong one. I lost the bad line where they all come together over the body mount and cross member. Damn, and I was feeling so good
So let me get this straight-you had a brake line that rusted through and you are replacing it from like the rear block that separates the rear wheels to the abs unit and you lose which line is which when it passes around a body mount and goes up the firewall. what I would do is push and or pull that line-take it out of the clips that hold it along the way-tracking until you reach your destination-brake lines are a nasty job-ask your auto parts guy about the newer more flexible brake line that can be bent by hand-they are wonder full-also I make all the connections up with a flanger flair tool and you should get a small pipe cutter so so the ends will be nice and straight-cheers Denny
Answers & Comments
So let me get this straight-you had a brake line that rusted through and you are replacing it from like the rear block that separates the rear wheels to the abs unit and you lose which line is which when it passes around a body mount and goes up the firewall. what I would do is push and or pull that line-take it out of the clips that hold it along the way-tracking until you reach your destination-brake lines are a nasty job-ask your auto parts guy about the newer more flexible brake line that can be bent by hand-they are wonder full-also I make all the connections up with a flanger flair tool and you should get a small pipe cutter so so the ends will be nice and straight-cheers Denny