Here is the answer. If you need more info, type in what you need into GOOGLE!Thats what I do! They have all the answers!http://www.cbtricks.com/radios/galaxy/dx88hl/dx88hl_freq_pcb_old.htm"WILDCAT" IN LAURELVILLE OHIO35 YEARS OF CB FUN!!!
To use this radio on the CB band, you set the 10 Khz switch to OFF, and then turn the band switch to A/E.Here is a Frequency Chart.Here is the manual.When the 10 Khz switch is on OFF, the band switch is E,F,G,H. When the 10 Khz switch is in the ON position, then the band switch is A,B,C,D.So when you are on band E, which is when the 10 Khz is OFF, and the band switch is in the first position, it is on the E band.I would get your self a Frequency counter. It makes using a radio like that much easier.Hope this helps!
Copyright © 2024 QA.XPDF.PUB - All rights reserved.
Answers & Comments
Here is the answer. If you need more info, type in what you need into GOOGLE!
Thats what I do! They have all the answers!
http://www.cbtricks.com/radios/galaxy/dx88hl/dx88hl_freq_pcb_old.htm
"WILDCAT" IN LAURELVILLE OHIO
35 YEARS OF CB FUN!!!
To use this radio on the CB band, you set the 10 Khz switch to OFF, and then turn the band switch to A/E.
Here is a Frequency Chart.
Here is the manual.
When the 10 Khz switch is on OFF, the band switch is E,F,G,H. When the 10 Khz switch is in the ON position, then the band switch is A,B,C,D.
So when you are on band E, which is when the 10 Khz is OFF, and the band switch is in the first position, it is on the E band.
I would get your self a Frequency counter. It makes using a radio like that much easier.
Hope this helps!