1. Turn on the device you wish to program. 2. Press and hold CODE SEARCH/SETUP until the INDICATOR LIGHT lights, then release. 3. Press and release the device button for the device you are programming (TV, VCR, DVD, etc.). The INDICATOR LIGHT will blink once then remain lit. For AUX, press AUX then the device button you are assigning to AUX. 4. Press and release POWER until your device turns off. Wait at least 2 seconds between each time you press POWER. Important: You may have to press POWER up to 250 times. 5. When your device turns off press the ENTER/SAVE button. The INDICATOR LIGHT will go off.
That was awesome!!! Only took about 15 tries, and the TV turned off! Now I have a remote!! Thank you!!That was awesome!!! Only took about 15 tries, and the TV turned off! Now I have a remote!! Thank you!!
Answers & Comments
Try these steps... I hope this helps..
1. Turn on the device you wish to program.
2. Press and hold CODE SEARCH/SETUP until the INDICATOR LIGHT lights, then release.
3. Press and release the device button for the device you are programming (TV, VCR, DVD, etc.). The INDICATOR LIGHT will blink once then remain lit. For AUX, press AUX then the device button you are assigning to AUX.
4. Press and release POWER until your device turns off. Wait at least 2 seconds between each time you press POWER. Important: You may have to press POWER up to 250 times.
5. When your device turns off press the ENTER/SAVE button. The INDICATOR LIGHT will go off.
That was awesome!!! Only took about 15 tries, and the TV turned off! Now I have a remote!! Thank you!!
If you need the list of codes this site helped me program my remote. Good luck!http://www.eliztech.com/remotes/ge-4digit-codes.php