I need over-ride code for my t.v. All channels are locked. I have already been advised that company is out of business. could you find a code from (a TV manual -online?) or maybe manufacturer used a "common" over-ride code for more than one t.v. model? my tv is: Broksonic: model CTVG5463GVC
Televison & Video - Broksonic - CTVG-5463GVC 19" TV
Hi cellodog There is a couple of fix for that problem that i`d like you to try; With the tv on press the menu button on the remote and hold it for over ten seconds. If that is not working try this; Hold the volume down on the tv until it reaches 0 and keep holding it while you press channel up or 9 on the remote.(that should bring up the service menu) Then press 8 on the remote to exit and restart the tv. let me know how it goes
Hold the Vol. button on your Set (TV itself) till it will reach to 0. At the same time when you holding the Vol. (0) press the button "0" on your Remote for more than 2 second. Go to the menu, V-Chip set and you can enter new Password. After you enter a new passport you can enter again to V-chip and set it ON or Off.
Hi again I have another one for you to try; Hold the Vol. button on your Set (TV itself) till it will reach to 0. At the same time when you holding the Vol. (0) press the button "0" on your Remote for more than 2 second. Go to the menu, V-Chip set and you can enter new Password. After you enter a new passport you can enter again to V-chip and set it ON or Off.
Answers & Comments
Hi cellodog
There is a couple of fix for that problem that i`d like you to try;
With the tv on press the menu button on the remote and hold it for over ten seconds.
If that is not working try this;
Hold the volume down on the tv until it reaches 0 and keep holding it while you press channel up or 9 on the remote.(that should bring up the service menu)
Then press 8 on the remote to exit and restart the tv.
let me know how it goes
Hi again
I have another one for you to try;
Hold the Vol. button on your Set (TV itself) till it will reach to 0.
At the same time when you holding the Vol. (0)
press the button "0" on your Remote for more than 2 second.
Go to the menu, V-Chip set and you can enter new Password.
After you enter a new passport you can enter again to V-chip and set
it ON or Off.
Does TV have parental block/Channels Blocked and is it Pass word you need to reset?
try this number 1-800-333-9099 they sell broksonic products
0000 factory reset
Try these codes:
136 / 147/ 121 / 111/ 112/ 114/ 122/ 123/ 124/ 173 /
004/ 009/ 014/ 023/ 024/ 025/ 026/ 027/ 030/ 032/ 033/ 034/ 035/ 036/ 037/ 038 /
One of these codes should work.
Good luck and have a great day!
Here:
5000/ 5003/ 5004/ 5005
4007/ 4009
1011/ 1048/ 1078/ 1082/ 1083/ 1094/ 1096/ 1098
6099/ 6101
7102
3103 / 3107/ 3113/ 3129/ 3133/ 3167/ 3179/ 3181/ 3187/ 3188/ 3194
Thank you!