Here's a manual: Euro Pro 420 Instruction Manual Troubleshooting is on page 62. P.S.--it is usually a good idea to always raise the presser foot when threading the upper thread. That helps seat the thread in the tension disk. Also, change the needle often (ie, every time a new project is begun or whenever it is damaged/bent/dull. ...
Copyright © 2024 QA.XPDF.PUB - All rights reserved.
Answers & Comments
Here's a manual:
Euro Pro 420 Instruction Manual
Troubleshooting is on page 62.
P.S.--it is usually a good idea to always raise the presser foot when threading the upper thread. That helps seat the thread in the tension disk.
Also, change the needle often (ie, every time a new project is begun or whenever it is damaged/bent/dull.
...