TDC should put piston 1 to its highest position with valves closed (compression). 5.16 BTDC if you don't have the markings on the flywheel and the engine block, you should make them anywhere and use them as reference markings. Hope it helps.
Copyright © 2024 QA.XPDF.PUB - All rights reserved.
Answers & Comments
TDC should put piston 1 to its highest position with valves closed (compression). 5.16 BTDC if you don't have the markings on the flywheel and the engine block, you should make them anywhere and use them as reference markings. Hope it helps.