I need to know what each knob and switch on front of radio should be set at. i know about the squelch setting and mic gain (at least i think I do) but not sure about all the other settings for your standard set up for this radio thanks laydgator
Radio Communications - Galaxy Radios - DX-44V 40-Channels Base CB Radio
Answers & Comments
To use this radio on the CB band, you set the 10 Khz switch to OFF, and then turn the band switch to A/E.
Here is a Frequency Chart.
When the 10 Khz switch is on OFF, the band switch is E,F,G,H. When the 10 Khz switch is in the ON position, then the band switch is A,B,C,D.
So when you are on band E, which is when the 10 Khz is OFF, and the band switch is in the first position, it is on the E band.
I would get your self a Frequency counter. It makes using a radio like that much easier.
Hope this helps!