I need to reassemble my rainbow e series electrified hose handle
To remove a blockage, I disassembled the electrified hose handle to my rainbow e series vacuum. I put everything back in place except one black wire. This black wire connects at one end to the metal hose piece that extends out the front of the handle and is about 10 inches long. The end not connected to the metal hose has about 1/2 inch of exposed bare wire and my question is, where does this exposed wire end connect? Is it a ground wire?
Vacuums - Rainbow - E series Canister Wet/Dry Vacuum
Answers & Comments
Yes, it is a ground wire. When you put it back together, make sure that the two halves of the hose handle are holding the wire up against the metal. I just had one apart the other day for the first time and if I recall correctly, the wire goes near the center for reassembly. Hope this helps!