I need to remove the furniture from an old tecnik DW 2677 dishwasher as I have a new one and want to replace the front. I cant see any screws or how to remove it
1 Open door and you will see 5 crosshead screw on each side, undo the top screws and lift up the plastic control panel to release it from the metal clips fixed to the back of the furniture door 2 Lift up the door to release the plastic clips (fixed to the back of the furniture door) from the keyway slot in the metal dw door 3 If its a 2677 that is the replacement the reverse the proceedure on the new one, there is no point cahnging the clips, if its not then 4 Swap over to new makes fixings and rehang the door
Answers & Comments
1 Open door and you will see 5 crosshead screw on each side, undo the top screws and lift up the plastic control panel to release it from the metal clips fixed to the back of the furniture door
2 Lift up the door to release the plastic clips (fixed to the back of the furniture door) from the keyway slot in the metal dw door
3 If its a 2677 that is the replacement the reverse the proceedure on the new one, there is no point cahnging the clips, if its not then
4 Swap over to new makes fixings and rehang the door