I need to replace the shaft that the chuck screws onto for a Dremel 400 rotary tool. Where can I get parts?. Created by ronfauvist77. Tools & Hardware - Others - Dremel - 400 Series Xpr Rotary Tool Kit with Xpr Multisaw and Xpr...

I need to replace the bent shaft that the chuck screws onto

ronfauvist77 @ronfauvist77

February 2021 1 13 Report

I need to replace the bent shaft that the chuck screws onto

I need to replace the shaft that the chuck screws onto for a Dremel 400 rotary tool. Where can I get parts?

Tools & Hardware - Others - Dremel - 400 Series Xpr Rotary Tool Kit with Xpr Multisaw and Xpr...

Answers & Comments

David Ford

I would go direct to Dremel.com or call them at 1-800-437-3635 and get the schematic and parts you need, I just checked and they have a parts diagram online that you can view. go to the section about manuals/literature and type in your model number. Good luck

Answers & Comments

Helpful Links

Helpful Social