I need your help. Anybody can make a photo Fargo Pro-L printer with mag encoder. I need front view without cover, where I can see the roller moving a card in a magnetic encoder
Office Equipment & Supplies - Fargo - Pro L ID Thermal Printer
putting a mag encoder in that printer is extremely difficult, that unit was not made to have one installed if it did not come with one. I dont have access to pictures without the covers. the chasis has to be taken off as well.
thanks
putting a mag encoder in that printer is extremely difficult, that unit was not made to have one installed if it did not come with one. I dont have access to pictures without the covers. the chasis has to be taken off as well.
Answers & Comments
If you want to modify the cover of the printer, your going to have to do it yourself.
putting a mag encoder in that printer is extremely difficult, that unit was not made to have one installed if it did not come with one. I dont have access to pictures without the covers. the chasis has to be taken off as well.
thanks
you can not do it because the light will interfere with the ribbon sensor on top of all the work needed to be done.