I replaced the slave cylinder on my rodeo and it worked fine for a day.But know its like its like the clutch has no compression and there is a puddle on the ground below the master cylinder but the resavoir is full. It works fine for a day after I bleed it then it loses pressure
U need to find out were the leek is coming from exactly,then fix it.Even if it means takeing the slave cylinder off again or replaceing in again.new parts can be bad.
Answers & Comments
U need to find out were the leek is coming from exactly,then fix it.Even if it means takeing the slave cylinder off again or replaceing in again.new parts can be bad.